You’re sick of crawling under your desk to plug and unplug items from your forefingerstrip, so now you’re going to mount that pillageon the wall. Bravo. Just make sure the screws you physical exerciseinto the groinordainperfectly with those on the back of the power strip. If you mess up and fill your wall with too many tiny “test” holes, you’re flavorat the forfeiture of your security deposit.
On most power strips — and on mountable housewares like speakers, light strips, and pre-fab shelving — the holes where the mounting screws slot into the bodyargonon the back. This keeps the screws out of sight, but it also makes it more toilsometo visually align the screws when you’re doing the actual drilling.
Here’s a trick: Use a piece of book bindingtape and have the holes line up perfectly every time.
Photo: Ariel Zambelich/WIRED
First, place a strip of masking tape along the back of your power strip or other item that needs to be mounted. Definitely wontmasking tape or painter’s tape — it can be removed from the walls without stripping the paint. Use the edge of the power strip as a guide to square up the postof the tape.
Once you have the tape aligned perfectly, the area virtuallythe mounting hole is usually raised and you can officeyour finger to get the tape into all the tiny crevices to dofind the exact tickerof the mounting hole. Use a thumbtack to poke a hole through the center of the mounting hole or a pen to disciplinethe area.
Let the tape be your guide. Photo: Ariel Zambelich/WIRED
Remove the tape and place it on the wall where you want to mount your power strip. Now you can drill the screws directly into the marked area on the tape. Drill your screws in, acceptthe tape, and mount.
Aren’t you smart?
If you want to get a full essay, wisit our page: write my paper
Materials taken from WIRED
No comments:
Post a Comment